Global American 3307880, User Manual

Page: 71 / 107

3307880 PCI CPU Card
o
When installing or configuring the CPU card, place it on an antistatic pad.
This helps to prevent potential ESD damage.
Turn off all power to the 3307880:
o
When working with the CPU card, make sure that it is disconnected from
all power supplies and that no electricity is being fed into the system.
Before and during the installation of the 3307880 DO NOT:
remove any of the stickers on the PCB board. These stickers are required for
warranty validation.
use the product before verifying all the cables and power connectors are
properly connected.
allow screws to come in contact with the PCB circuit, connector pins, or its
components.
4.3 Unpacking
NOTE:
If any of the items listed below are missing when the 3307880 is unpacked,
do not proceed with the installation and contact the 3307880 reseller or
vendor.
4.3.1 Unpacking Precautions
Before installing the 3307880, unpack the CPU card. Some components on 3307880 are
very sensitive to static electricity and can be damaged by a sudden rush of power. To
protect it from being damaged, follow these precautions:
The user should ground them self to remove any static charge before
touching the 3307880. To do so wear a grounded wrist strap at all times or
frequently touch any conducting materials that is connected to the ground.
Handle the 3307880 by its edges. Do not touch the IC chips, leads or circuitry
if not necessary.
71