Global American 3307880, User Manual

Page: 78 / 107

3307880 PCI CPU Card
4.5.1 Clear CMOS Jumper
NOTE:
The battery connector (CN10) is used as the clear CMOS jumper on the
3307880.
Jumper Label: CN10
Jumper Type: 2-pin header
Jumper Settings: See Table 4-3
Jumper Location: See Figure 4-3
If the 3307880 fails to boot due to improper BIOS settings, use this connector to clear the
CMOS data and reset the system BIOS information. To do this, disconnect CN10 and
keep it disconnected for at least five seconds. After five seconds has elapsed, reinsert the
connector.
If the “CMOS Settings Wrong” message is displayed during the boot up process, the fault
may be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of the
following:
Enter the correct CMOS setting
Load Optimal Defaults
Load Failsafe Defaults.
After having done one of the above, save the changes and exit the CMOS Setup menu.
Clear CMOS DESCRIPTION
Closed Keep CMOS Setup
Open Clear CMOS Setup
Table 4-3: Clear CMOS Jumper Settings
78