Global American 3307880, User Manual

Page: 73 / 107

3307880 PCI CPU Card
The following components must be installed onto the CPU card or connected to the CPU
card during the installation process.
SO-DIMM module
Peripheral device connection
4.4.1 SO-DIMM Module Installation
4.4.1.1 Purchasing the Memory Module
When purchasing SO-DIMM modules, the following considerations should be taken into
account:
The 200-pin SO-DIMM socket can support a memory chip with a maximum
size of 1GB
The SO-DIMM socket supports DDR speeds of 333MHz and 400MHz
4.4.1.2 SO-DIMM Module Installation
The 3307880 CPU card has one DDR SO-DIMM socket. To install the SO-DIMM module,
follow the instructions below.
Step 1: Locate the SO-DIMM module socket on the solder side of the CPU card.
Step 2: Push the SO-DIMM chip into the socket at an angle. (See Figure 4-1 )
Step 3: Gently pull the arms of the SO-DIMM socket out and push the rear of the
SO-DIMM module down. (See Figure 4-1 )
Step 4: Release the arms on the SO-DIMM socket. They clip into place and secure the
SO-DIMM module in the socket. Step 0:
73