2-3
Hardware Setup
Memory
The mainboard provides one 240-pin non-ECC
DDRII
DIMM and supports up to 1GB
system memory.
DDRII
240-pin, 1.8V
64x2=128 pin
56x2=112 pin
Installing DDRII Modules
1. The memory module has only one notch on the center and will only fit in the right
orientation.
2. Insert the DIMM memory module vertically into the DIMM slot. Then push it in until the
golden finger on the memory module is deeply inserted in the socket.
3. The plastic clip at each side of the DIMM slot will automatically close.
Volt
Notch
Important
You can barely see the golden finger if the module is properly inserted in the
socket.
