Page
12
of
15
SWITCH OPERATION
Four separate modes are available for the mic on switch. The selected configuration
will be stored and reloaded when the GS-FW0035 is powered on.
To change the operation of the switch:
1. Turn the device off
2. Hold down the mic on button
3. Turn the device on
4. Release the mic on button
5. Press and release the mic on button until the desired mode is selected (As
indicated by the mic on LED)
6. Remove power, setting will be saved for next power up
Program modes
The following configurations are available for the mic on button
1) Program toggle on/off
a. Indications of mode during mode change
i. PGM LED will flash once
2) Program momentary off (cough)
a. Indication of mode during mode change
i. PGM LED will flash twice
3) Program momentary on mode
a. Indication of mode during mode change
i. PGM LED will flash three times
4)
Program momentary off “intelligent lever key”
a. Indication of mode during mode change
i. PGM LED will flash four times
Summary of Contents for GS-FW035
Page 11: ...Page 11 of 15 SIMPLIFIED BLOCK DIAGRAM...
Page 14: ...Page 14 of 15...
