Page
13
of
24
CONNECTING THE EXPRESS
IP
MKII TO A DANTE
NETWORK
The Express
IP
MKII is a network audio device utilizing the reliable and versatile
Dante audio over IP protocol. Dante is a widely used proprietary system made by
Audinate.
For full details of the power of Dante network audio and instructions for using it, visit
Getting Dante Controller
If you are connecting the Express
IP
MKII to a new Dante network the first thing you
will need to do is to get the free Dante controller software from Audinate.
This can be downloaded by visiting Audinate’s web site at
Connecting Express
IP
MKII To the Network
The Express
IP
MKII can be connected to the network that you are going to use for
your audio distribution simply by plugging in either, and, or any of the network
connections on the front panel. Once connected to the network it will be possible to
see the Express
IP
MKII from within the Dante controlle
r and route its’ audio circuits.
Audio Over IP Network
We strongly recommend that you consider your network topology carefully and
would not recommend sharing broadcast audio and general data on the same
network.
For more details of audio over IP network structure please visit
