Page
10
of
26
PANEL LAYOUT & FUNCTIONS
Front Panel
1. Power ON LED
2. Volume Control
3. Headphone Connections
1. Power ON LED
This bright blue LED indicates that the Virgil 1 is receiving power from the network
and is working correctly.
2. Volume Controls
This potentiometer equally adjusts the headphone volume of the two input circuits
being received from the Dante network.
It also can adjust the output volume of the balanced line level XLR outputs on the
rear panel.
3. Headphone Connectors
These 2 headphone jacks are wired in parallel with each other. They are both 3 pole
TRS (Tip Ring Sleeve)
but both can accommodate 2 pole ‘mono’ jacks.
The left jack socket is designed to accept standard 3.5mm plugs and the right socket
accepts standard 6.35mm (1/4”) plugs.
