Page
27
of
34
AES67 MODE
The Beatrice uses a module from Audinate called a Brooklyn Module for its network
audio interface. Audinate are the company behind Dante® and as such the module’s
primary network audio protocol is Dante, however Audinate have enabled their
module to comply with AES67 and therefore the Beatrice can be set to AES67 mode for
interaction with other AES67 devices.
Please note however that Glensound are relying on Audinate’s AES67 interface and are
unfortunately not able to provide full AES67 support for the unit. AES67 support should
be sought directly from Audinate.
1.
Turning On AES67 Mode
If you want to use your Beatrice on an AES67 network and it has not been set to AES67
mode then this can be set in Dante controller by double clicking the Paradiso to open
the Device View window where you will find an AES67 tab to enable AES67 support.
Once the AES67 drop down box has been enabled you’ll have to reboot the Beatrice for
the change to take effect. After the reboot go back to the AES67 tab and set the
multicast prefix address to one that is suitable for your newtork.
Summary of Contents for Dante BEATRICE R16
Page 2: ...Page 2 of 34...