Page
21
of
34
FIXED MIXER
The Beatrice R16 includes multiple fixed ratio mixers with inputs & outputs directly on/
off the Dante/ AES67 network.
In a small simple intercom system there may be requirements for one user to listen to
multiple sources on one single talkback channel. The internal fixed mixer within the
Beatrice R16 is suitable for setting this up.
Groups are another possible requirement in small intercom systems whereby 2 or 3
operators (such as cameramen) are normally all on one single talkback circuit. The
internal fixed mixer also helps with setting these circuits up.
The below table shows how these fixed ratio mixers are configured internally in the
DSP. To use one or more of the internal mixers just route the audio to/ from the mixer
channels in Dante
®
controller.
Note that the default name in Dante
®
Controller of the receivers are ‘Mix In X’ (whereby
X is the channel number)
MIX OUTPUT
SUM OFF
Dante Output
Channel No:
Default Name in Dante Controller: Dante Receiver Channel
Nos:
22
“Sum of 23 to 32”
23 to 32
23
“Sum of 23 to 27”
23 to 27
24
“Sum of 28 to 32”
28 to 32
25
“Sum of 23 to 25”
23 to 25
26
“Sum of 26 to 29”
26 to 29
27
“Sum of 30 to 32”
30 to 32
28
“Sum of 23 & 24”
23 and 24
29
“Sum of 25 & 26”
25 and 26
30
“Sum of 27 & 28”
27 and 28
31
“Sum of 29 & 30”
29 and 30
32
“Sum of 31 & 32”
31 and 32
Summary of Contents for Dante BEATRICE R16
Page 2: ...Page 2 of 34...