Page
15
of
34
MICROPHONE PHANTOM POWER
The factory default configuration of the R16 has the front panel microphone input set
as +12v phantom power on. It is possible to de activate or ac12v phantom
panel by moving an internal jumper.
To turn on phantom power the lid of the unit must be removed.
Please make sure the unit is turned off before starting this procedure
To do this remove one of the sides of the unit, which is held in place by 4 screws (2 at
the front & 2 at the rear). Then slide the lid out to the open side. You can then access
the jumper shown in the 2 pictures below.
Jumper for Phantom Power OFF
Jumper for Phantom Power ON
After turning the phantom power on or off please replace the lid and re-fix the
side panel.
Summary of Contents for Dante BEATRICE R16
Page 2: ...Page 2 of 34...