Page
21
of
30
AES67 MODE
The Athens 2 uses a Brooklyn 2 module from Audinate for its network audio
interface. Audinate are the company behind Dante
®
and as such the
module’s
primary network audio protocol is Dante, however Audinate have enabled their
module to comply with AES67 and therefore the Athens 2 can be set to AES67 mode
for interaction with other AES67 devices.
Please note however that Glensound are relying on Audinate’s AES67 interface and
are unfortunately not able to provide full AES67 support for the unit. AES67 support
should be sought directly from Audinate.
1. Turning On AES67 Mode
If you want to use your Athens 2 on an AES67 network and it has not been set to
AES67 mode then this can be set in Dante controller by double clicking the Athens 2
to open the Device View window where you will find an AES67 tab to enable AES67
support.
Once the AES67 drop down box has been enabled you’ll have to reboot the Athens
2 for the change to take effect. After the reboot go back to the AES67 tab and set the
multicast prefix address to one that is suitable for your newtork.
