Page
11
of
21
AOIP2M Rear Panel Layout
Microphone inputs
Two high quality microphone preamplifiers. See the end of the manual for wiring
information.
DC Power Input jack
A standard DC IN barrel jack connector for 12V 1A DC input. The center pin is 2.5mm. It
is wired center pin + Volts.
USB connector
Micro USB connector for device firmware updates.
Network RJ45 etherCON
The Primary 100Mbps ethernet IP interface allow connection to a Dante network. The
amber LED indicates network activity. The connector is a Neutrik etherCON which
allows locking connections with a compatible etherCON cable.
The AOIP2M can be powered via PoE or the DC jack input or both at the same time for
redundancy. The PoE source used to power the device can be a mid-span adapter or a
network switch with PoE conforming to IEEE 802.3af.
Network RJ45
etherCON
USB connector
Network link LED
DC Power
Input jack
Microphone
inputs
