Glen Dimplex DHW 300VD+, Installation And Operating Instruction

Page: 44 / 76

EN-20 451905.66.07 · FD 9912 www.gdts.one
English DHW 300VD+
12 Device information
1 Type and order code
DHW 300VD+
2 Design
2.1 Number of units 1
2.2 Heat source Air
2.3 defrosting yes
2.4 Nominal cylinder volume litres 280
2.5 Transfer area of the internal heat exchanger m
2
1.0
2.6 Sensor pipe ø
internal
for external sensors mm 9
2.7 Installation location Frost-free
2.8 Cylinder material Enamelled steel complying with DIN 4753
2.9 Cylinder insulation PU with ABS cladding
2.10 Nominal cylinder pressure bar 6
3 Operating limits
3.1 Heat source operating limit
1
°C
-7 to 35
3.2 Domestic hot water setting range in heat pump operation °C
20 to 60
± 1.0 K
4 Flow / sound
4.1 Air volume flow min. / max. m
3
/h
x / 325
4.2 Air volume flow level 1 / 2 / 3 m
3
/h
60 / 90 / 120
4.3 External compression max. Pa 100
4.4 Sound power level device dB(A) 60
4.5 Sound pressure level
2
device dB(A)
50
5 Dimension/weight and filling quantities
5.1 Dimensions height (min) x width x depth mm 1867 x 740 x 776
5.2 Air duct connection diameter /
nominal size with EPP ventilation pipe mm
190 / DN 160
5.3 Weight (empty) kg 123
5.4 Refrigerant R 134a/ filling weight kg 0.95
5.5 GWP value / CO
2
equivalent
1430 / 1
5.6 Refrigeration circuit hermetically sealed yes
6 Electrical connection
6.1 Degree of protection IP 21
6.2 Connection voltage 1/N/PE~230 V, 50 Hz
6.3 Connection line approx. 2.7 m - 1.5 mm
2
with plug
6.4 Fusing max. A C16
6.5 Heat pump power consumption cos

0.8
6.6 Supplementary electrical heating power consumption A 6.5
6.7 Power consumption max. A 9.5
6.8 Switch-on current max. A 13.5
6.9 Heat pump nominal power consumption at 60 °C
3
W
528
6.10 Supplementary electrical heating power consumption W 1500
6.11 Power input fan level 1 / 2 / 3 W … / ... / 30
6.12 Total power consumption max. W 2200
7 Hydraulic connection
7.1 Circulation pipe connection R3/4
7.2 Domestic hot water connection - outlet R1
7.3 Cold water connection - inflow R1
7.4 Internal heat exchanger connection Rp1
8 Performance values
8.1 Heat-up time
3 4
h:min
09:22