Glaziar Predator D12, Instructions For Use Manual

Page: 34 / 63

www.glaziar.com / info@glaziar.com
34
The unit will enter into the standby mode when water tank is full or the water tank is not installed properly. After
emptying the tank, or install the water tank properly the unit will go on to the previous mode.
Except for the power button, all other buttons are invalid.
1- When unplugged directly or power cut, then reconnect to the power supply, the dehumidifi er will run with the
mode prior to the shutdown. The timer setting will be kept.
2- Press the power button to switch off the dehumidifi er, and then press the power button to switch it back on.
The dehumidifi er will run with the mode prior to the shutdown. The timer setting will be canceled.
3- Switch off the dehumidifi er and unplug the power cord, then reconnect the power supply and switch on the
dehumidifi er. It will run as factory preset mode the fi rst time you received the dehumidifi er.
Low Temperature Defrost Indicator
Auto Shut off with Water Tank Full Indicator
Memory Function:
When the ambient temperature is too low, dehumidifi er will enter into the defrost mode, the unit runs with high fan
speed without dehumidifying.