Back Bar Coolers
Two, Three and
Four Door Remote
BB48-L1-BSN(LR)
•
Remote Unit
• All stainless steel interior construction with radius inte-
rior corners for easy cleaning
• CFC free foamed-in-place insulation
• Galvanized steel sub-top
• Black vinyl-clad steel doors and exterior sides
• Stainless steel die cast handle
• Leg sockets recessed into base
• 1/2" thick ABS plastic threshold scuff plate
• 180° swinging doors
Printed in USA
Rev. 06-10-14
Specifications subject to change without notice. For current specifications please visit our website
.
Glastender, Inc.
• 5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Approval/Notes:
Project:
Item
#:
Qty:
Model #:
4.04
BB__ -_ _-_ _ N(____)
Refrigeration
Hook-Up Location:
L = Left or R = Right
Door Hinge Location†:
(from left to right)
L = Left or R = Right
Base Height:
1 = 1"
6 = 6" Legs
Top Style:
N = No finished top
L = Laminated
S = Stainless
Door Style:
B = Black vinyl-clad
U = Unlaminated
L = Laminated
S = Stainless
G = Glass
X = Stainless Glass
Y = Laminated Glass
Size:
48 = 48" Two Door
72 = 72" Three Door
96 = 96" Four Door
AIA#
SIS#
Electrical
• 120V, 1 phase, 60 Hz
• Dedicated 15 amp circuit is required
• 14 gauge wire connection is made inside the cooler next to
evaporator housing - interior access is through on of the 3/4"
side knock-out holes (electrician’s choice)
Refrigeration
• R134a or R404a expansion valve & temperature control
included. Specify type required when ordering.
• Refrigeration system capacity requirements*:
BB48 - 1,185 BTU/hr
BB72 - 1,730 BTU/hr
BB96 - 2,015 BTU/hr
* BTU/hr design loads are figured assuming 85° F ambient,
all glass doors, maximum internal loading, and average
compressor cycling. No solar heat gain has been
accounted for.
• All refrigeration hookups are made at the installation site
Plumbing
• A six foot length of 1/2" ID by 5/8" OD plastic tubing is pro-
vided to drain condensate. The tubing should exit through one
of the 3/4" side knock-out holes (installer’s choice). The
maximum drainage is one ounce per hour - consult local codes
for compliance - a floor drain may be required
Shelving
• Two adjustable coated shelves and one bottom coated rack per
door included
Legs
• 1-5/8" diameter
• Stainless steel bullet feet
Materials
• 22 gauge stainless steel parts include: interior floor, walls,
ceiling, front of cabinet, and evaporator housing
• 22 gauge black vinyl-clad parts include: sides and standard doors
• 22 gauge galvanized steel parts include: exterior sub-top and back
• 16 gauge stainless steel parts include: legs
• 16 gauge galvanized steel parts include: base
• 16 gauge zinc plated CR steel parts include: leg sockets
• 12 gauge stainless steel parts include: hinges, hinge brackets, and
lock brackets
Standard Features
Specifications
NSF standard 7 listed
for open food storage
† Specify a hinge location for each door
COMPONENT
A family company manufacturing in the USA
Conforms to ANSI/UL STD 471
Certified to CSA STD
C22.2 No. 120
