4
Safety signs
On our frames there are several areas which are pinch point hazards
meaning that there is a possibility of you pinching a body part so stay clear and be cautious of these
areas.
All grease zerks are pre-
greased at the manufacture. It is the consumer’s responsibility
to maintain grease updates. Axels should be greased twice annually, once in the spring and once in the
fall.
ALIGNMENT:
It is each customers responsibility to have their Glacier aligned after purchase, regardless if the Glacier
is new or used. Alignments need to
be done periodically throughout ownership. When one doesn’t
comply with these directions your Glacier may occur tire wear. Each customer will need to show a copy
of their receipt of alignment done to receive any warranty on tire or other related axle issues.
Proper maintenance and tips for sealing your roof
. (Please
use attached diagram for instructions).
. Pressure wash the whole roof and remove any loose debris.
. Remove any loose or cracked caulking around the outer edge.
. Dry off all surface area.
. Apply new self-leveling caulking around the outer edge and let stand 12 hours before transporting
the unit.
.Apply new sealant at least once a year to the following
.Roof, Trim, Windows, Doors, All corners.
. Keep safety signs clean and legible at all times.
. Replace safety signs that are missing or have become illegible.
. Replaced parts that displayed a safety sign should also display the current sign.
. Safety signs are available from your distributor or dealer parts department or the
factory.
