Glacier bay PPSOFGOK24 Use And Care Manual Download Page 1

INSTALLING THE HARDWARE

 

Attach the knob (AA) to the cabinet 
with the provided screw (BB).

BB

AA

Use and Care Guide 

Vanity Combo

Installation

PREPARING FOR INSTALLATION 

NOTE:

 Before installation, make sure all parts are present. 

Compare parts with the Hardware Included list. If any part is 
missing or damaged, do not attempt to install the product.

 

Determine the desired mounting location, and mark the 
wall where the unit will be installed.

NOTE:

 For secure installation, the unit must be mounted 

to at least one wall stud. 

  

POSITIONING THE CABINET

 

Move the cabinet into place, 
and use wood shims to level the 
cabinet against the wall.

 

Item# 1000 398 630, 1000 398 637

1000 050 591, 1000 398 605
1000 398 610, 1000 398 616

1000 050 588

 Model# PPSOFGOK24, PPSOFGOK30, PPSOFSVL24, PPSOFSVL30 

PPSOFWHT24, PPSOFWHT30, PPSOFTRF24

HARDWARE INCLUDED

AA - Knob x 2

BB - Knob screw x 2

TOOLS REQUIRED

Hammer

Safety goggles

Phillips screwdriver

Power drill

Measuring tape

Wall hardware

Caulk/sealant

Level

INSTALLING THE CABINET

 

For wall stud installation, insert #12 x 3 in. screws with 
washers into the stud locations (not included).

 

For drywall installation, drill holes at the appropriate 
locations and insert toggle bolts with washers (not included).

 

For concrete wall installation, drill 1/4 in. holes at the 
appropriate locations and insert #12 wall anchors, followed 
by #12 x 3 in. screws (not included).

INSTALLING THE VANITY TOP

IMPORTANT:

 Do not use plumber’s putty.

NOTE: 

The faucet, drain, and supply lines are not included. Install these 

parts to the vanity top according to the manufacturer’s instructions.

 

Apply silicone caulk/sealant (not included) to all 
four corners of the cabinet.

 

Place the vanity top onto the cabinet.

 

Position the top so that it has an equal amount of 
overhang on each side and use a level to ensure 
the vanity top surface is level.

 

Apply silicone onto the seam between the edge 
of the vanity top and the wall, smooth the bead, 
and allow to cure before use.

HOMEDEPOT.COM     

Please contact 1-888-774-8062 for further assistance.

Reviews: