Glacier bay KHWHT30D Use And Care Manual Download Page 1

HOMEDEPOT.COM/GLACIERBAY

Please contact 1-888-774-8062 for further assistance.

Installation

PREPARING FOR INSTALLATION 

NOTE:

 Before installation, make 

sure all parts are present. Compare 
parts with the Hardware Included list. 
If any part is missing or damaged, do 
not attempt to install the product.

 

Determine the desired mounting location, 
and mark the wall where the unit will be 
installed.

NOTE:

 For secure installation, the 

unit must be mounted to at least one 
wall stud. 

  

CUTTING THE OPENING FOR   

 

 

PLUMBING FIXTURES 

NOTE:

 This step applies to vanity 

cabinets with full back panels only.

 

Locate and mark plumbing on the back panel.

 

Drill a pilot hole through the back panel.

 

Use a keyhole saw to cut an opening for the 
plumbing fixtures.

POSITIONING THE   

 CABINET

 

Move the cabinet into 
place, and use wood 
shims to level the 
cabinet against the wall.

Use and Care Guide 

Vanity Combo

TOOLS REQUIRED

Claw hammer Safety goggles

Phillips 

Screwdriver

Caulk/sealant

Power drill Measuring tape Wall hardware Keyhole saw Level

HARDWARE INCLUDED

INSTALLING THE CABINET

 

For wall stud installation, insert #12 x 3 in. screws with 
washers into the stud locations (not included).

 

For drywall installation, drill holes at the appropriate 
locations and insert toggle bolts with washers (not included).

 

For concrete wall installation, drill 1/4 in. holes at the 
appropriate locations and insert #12 wall anchors, followed 
by #12 x 3 in. screws (not included).

INSTALLING THE HARDWARE

AA

CC

DD

BB

BB

KHG30D

KHG36D

 

Attach the handles (AA) and the knobs (BB) to the door 
the top drawer on the vanity with short screws (CC) and 
to the two lower drawers on the vanity with long screws 
(DD).

REMOVING THE DRAWER

Press

downward

Press

upward

 

Press release levers in opposite directions while pulling drawer out of the vanity.

AA - Handle

x 4

BB - Long 

Screw

x 4

CC - Medium 

Screw

x 2

DD - Short 

Screw

x 2

Item #  1002 835 295

Item #

1002 835 317

Item #

1002 835 320

Item #

1002 835 323

Item #

1002 814 804

Item #

1002 814 817

Model #

KHWHT30D

Model #

KHWHT36D

Model #

KHDOV30D

Model #

KHDOV36D

Model # KHDCOG30DY

Model # KHDCOG36DY

Reviews: