Paper Holder
Installation
1
2
3
□
Item #220 779
□
□
□
TOOLS REQUIRED
HARDWARE INCLUDED
AA - Screw x 4
EE - Template x 1
BB - Drywall anchor x 4
CC - Wall anchor x 4
DD - Mounting bracket x 2
LIMITED LIFETIME WARRANTY
For additional assistance or service call: 1-855-HD-GLACIER
Use and Care Guide
SELECTING A MOUNTING
LOCATION
Position the template (EE) on the
intended mounting surface.
Use a level to ensure that the
template (EE) is level on the wall and
then tape the template (EE) to the
wall.
ATTACHING THE PAPER HOLDER
Place the paper holder over the
mounting brackets (DD), and
ensure the paper holder posts are
properly aligned with the mounting
brackets (DD).
□
Attach the paper holder to the
mounting brackets (DD).
INSTALLING THE MOUNTING
BRACKETS
If mounting on a tile wall, drill 3/16
in. holes in the marked locations on
the template (EE), and insert the wall
anchors (CC) in the holes.
If mounting on a drywall, drill 3/16
in. holes in the previously marked
locations, and tighten the drywall
anchors (BB) in the holes with a
Phillips screwdriver.
If mounting on a solid wood surface,
drill 1/8 in. starter holes in the
previously marked locations.
Remove the template (EE).
Attach the mounting brackets (DD) to
the mounting surface by inserting the
screws (AA) through the mounting
brackets (DD) and into the mounting
surface, or anchors if used.
□
□
□
□
NOTE:
Ensure all screws (AA) are
tightened securely. Do not over tighten
the screws (AA).
HOMEDEPOT.COM / GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
DD
DD
Model #BA116-7040
Safety glasses
Level
Drill
(3/16 in. or 1/8 in. bit)
Measuring tape
Flathead screwdriver
Phillips screwdriver
Pencil
CC
AA
