ECO450
ASSEMBLY & FITTING INSTRUCTIONS
SN-WH7WS SN-CH7WS SN-BA7WS
Matt White
Chrome
Brushed Aluminium
6W D-Lux ECO450 Downlight
Please read these instructions carefully before attempting to install this downlight.
It is advisable to keep these instructions in a safe place for future reference. If this downlight is installed
by a contractor, the contractor should ensure that the customer has a copy of these instructions.
SPECIFICATION
Voltage:
230V AC
Lamp:
6W LED NonDimmable GU10 (Supplied)
Lumens:
520lm
Colour Temperature:
3000k
Cut Out:
72mm for Standard Version
73mm IP Rated Version
Minimum Void:
100mm
Bezel Finish:
White, Chrome
or Brushed Aluminium
IP Rating:
IP20 for Standard Version
IP65 for IP Rated Version
Fire Rating:
Suitable for 30 and
60 minute ceilings
Electrical Safety:
BSEN60598
(Relevant clauses)
Acoustic Rating:
BS EN ISO 1403: 1995 & BS EN ISO 1406: 1998
IMPORTANT INFORMATION
It is recommended that luminaires are installed and fitted by a qualified electrician ensuring the
installation complies with the current IET wiring regulations BS7671:2008. This product is designed for
connection to a 230V supply. The product is double insulated There is a screwless mains connector
provided.
This product is Part C compliant. This appliance is Class II.
Always switch off the mains supply before servicing, fitting or replacing lamps.
Always check the lamp is correct for the application including its wattage and voltage. Special attention
should be paid to any installations with low ceiling voids. Never exceed the maximum wattage.
Ensure the lamp is correctly located in the lampholder.
Ø86.5mm
86
.5
mm
96
m
m
DEDICATED
IP
RATED
