GL-INET Beryl GL-MT1300 User Manual Download Page 120

Page: 120 / 157

Page 115 | 152

Change the default page

The default page is located

/etc/nodogsplash/htdocs/

, use SSH or WinSCP to

change this page. For more information about how to use SSH and WinSCP,
please access this. You may need basic HTML and CSS knowledge to change
this page, please learn these from w3school or other sites.

If you want to change the picture on the default page, just replace the image on

/etc/nodogsplash/htdocs/portal_login.png

After you had change the page, it need to disable Portal and enable Portal again
to enable the modified default page.

Disable Captive Portal

Follow the steps below to disable Captive Portal.

8.7. Tor

Using Tor in OpenWrt and GLi Routers

Tor feature is builded in from V3.100, please upgrade.

Summary of Contents for Beryl GL-MT1300






























































































































































Search results

Summary of Contents for Beryl GL-MT1300

Reviews:

Related manuals for Beryl GL-MT1300

Brands by name

Popular brands

GL-INET Beryl GL-MT1300, User Manual

Search results

Summary of Contents for Beryl GL-MT1300

Reviews:

Related manuals for Beryl GL-MT1300

Brands by name

Popular brands