GIRA
Info
Powernet Switchactuator 2fold/4fold
Installation Instructions
Powernet Switchactuator 2fold/4fold
03/99
Page: 1 of 3
Powernet Switchactuator 2fold
Art. Nr.: 0430 00
Powernet Switchactuator 4fold
Art. Nr.: 0433 00
4 5 6
1 2 3
A1
A2
N
L
µ
N N
L
L
c
d
e
50 Hz
230 V AC~
10 11 12
7 8 9
A3
A4
N
L
µ
N N
L L
c
d
e
50 Hz
230 V AC~
4 5 6
1 2 3
A1
A2
µ
System Information
This device is a product of the GIRA-Powernet
®
EIB system and complies with EIBA directives.
Detailed technical knowledge obtained in
instabus
or
GIRA-Powernet
®
EIB training courses is a pre-
requisite to proper understanding.
The functionality of this device depends upon the
software. Detailed information on loadable software
and attainable functionality may be taken from the
manufacturer’s ETS2 product database as well as
from the GIRA-Powernet
®
EIB controller database.
Planning, installation and commissioning of the unit
is done by means of the ETS2 software, Ver. 1.1 or
later, as well as by the GIRA-Powernet
®
EIB con-
troller.
Function
The Switchactuator allows two (or, respectively,
four) groups of loads to be switched independent of
each other.
Connection
Establish electrical connection as shown in the
opposite illustration.
Where:
c
GIRA-Powernet
®
EIB connection.
d
Programming
key.
e
Programming
LED
The connection of different external leads to the
channels is admissible.
Indications of danger
Caution! The installation and assembly of
electrical equipment may be carried out only by
a skilled person. Do not connect any loads/types
of load other than specified.
Subject to change without notice.
