"DALI Gateway C00CX2 EN / C00CX4 EN" software
Functional description
Best. Nr. 1060 00
Page 85 of 136
Setting the storage behaviour for the scene function
Upon reception of a storage telegram the current brightness values for all the DALI groups assigned to
a scene can be internally stored via the scene extension object. The brightness values to be stored
prior to the storing can be influenced by all functions of the individual groups (e.g. switching, dimming,
manual control).
A group must be assigned a scene in order to be able to edit the scene storage behaviour of the group.
Activate the “Save” check box for the DALI groups in the "Scene - [x] Scene name" parameter node
that are to respond to the memory function (cf. Figure 33).
The memory function is now activated for the DALI group. On reception of a memory telegram via
the "Extension unit" object, the current brightness value for this group will be internally stored.
Deactivate the “Save” check box for the DALI groups in the "Scene - [x] Scene name" parameter
node that are to respond to the memory function (cf. Figure 33).
The memory function is now deactivated for the DALI group. A memory telegram received via the
"Extension unit" object will be discarded.
When saving scene brightness values they will be permanently and internally stored in the DALI
Gateway and will overwrite the value of a group that was programmed last via the ETS. The
brightness values parameterized in the ETS will be accepted into the DALI Gateway only if the
“Overwrite scene values during ETS download” parameter has been set to “Yes”.
Independent of the set scene priority no new scene values will be stored for an assigned group if a
disable or a forced-control position has been activated in this group.
Setting the scene priority
The priority of the scene function over the disable or forced-control position functions of a group can be
parameterized for each scene. That makes it possible to have a scene recall override a disable or
forced-control position function of an assigned DALI group. Alternatively, a scene can have a lower
priority preventing disable or forced-position functions to be overridden by a scene recall.
The scene priority can configured separately for each created scene.
Set the “Priority for scene to disable / forced-control position” parameter in the “Scenes - [x] Scene
name" parameter node to „Lower priority“.
The scene now has a lower priority to the additional functions of the assigned groups. A scene recall
or a scene memory will be prevented for the groups that have an additional function activated.
Set the “Priority to disable scene / forced-control position” parameter in the “Scenes - [x] Scene
name" parameter node to „Higher priority“.
The scene now has a higher priority over the additional functions of the assigned groups. A scene
recall or a scene memory will always be executed when receiving a scene extension telegram..