Limiting the detection area
Figure 4: Push-on cover
The push-on cover can be used to limit the detection area, e.g. in order to mask out interference
sources.
Cover size
Range on the ground (height 3 m)
Complete push-on cover
Ø approx. 4.5 m
Area I cut out
Ø approx. 7.5 m
Areas I + II cut out
Ø approx 12 m
without push-on cover
Ø approx. 20 m
o
Pull off push-on cover.
o
Using scissors, cut out push-on cover along the marked lines as required.
o
Push on push-on cover.
Aligning the device
The device has three independent sensors for motion detection. The arrangement of the areas
A, B and C is clearly evident under the decor ring (Figure 6).
82585602
20.09.2012
6/10
KNX/EIB
Presence detector