Gira smart home app
25
Settings in the system menu
2.1.2
Start demo mode
If you tap [Start demo mode], the demo mode is displayed in the Gira X1 app.
The demo mode ends when you close the app and open it again.
2.1.3
Configuring remote access
If you require remote access to the Gira X1 via the Gira S1, you can configure
remote access in this view.
Prerequisite:
- The Gira S1 has already been configured and has a connection to the Gira de
-
vice portal.
- An activation code for the Gira Smart Home App has been created in the Gira
device portal.
1 Tap [Configure remote access].
2 Activate remote access by sliding the switch to the right.
3 Enter the remote access ID of the Gira S1 and the activation code generated
in the device portal.
4 Tap [ok].
You can integrate remote access in the visualization [see 1.6].
Fig. 25
Configuring remote
access
