Configuration in the ETS
Order No. 2089 00
Page 22
7.4. Transferring application programs and configuration data
Once you have programmed the physical address, you can transfer the application program, param
-
eter settings and group address connections to the device. You can create the connection to the device
via IP or KNX.
• To do so, select “Download Application”. The download takes approx. 15 seconds for a direct IP
connection or approx. 2 minutes if using TP.
• Wait for approx. 15 seconds after the download while the device copies the data and initialises the
application.
• Start-up is complete.
