Gira 1288 00, Operating Instructions Manual, Page: 21 / 44

21
House divided into several flats:
Assigning door station call buttons to home stations
To assign the door-station call buttons to the respective home
stations, please proceed as follows:
1. Press the "System prog." button on the control device for
3 seconds to start programming mode (see Page 19).
2. Press the call buttons on the door station for 3 seconds
until you hear a short acknowledgement tone.
Important: Press the call buttons in the sequence in
which the home stations will be assigned later.
3
You will hear a long acknowledgement tone.
3. Go to the home station whose call button is the first one
you pressed at the door station.
Press the
button on this home station for 3 seconds
until you hear a short acknowledgement tone.
3
A long acknowledgement tone indicates successful
assignment.
Three short acknowledgement tones indicate faulty
assignment. The memory of the home station may already
be occupied. A maximum of 10 call buttons can be
assigned to a home station (a maximum of 15 call buttons
to a surface-mounted hand-free feature home station).
Releasing the button after 3 seconds
If the button press is not ended after the first acknowledge-
ment tone, all assignments of the respective door/home sta-
tion will be deleted after an additional 3 seconds.