19
Switching system to programming mode
The Gira door communication system is switched to program-
ming mode for start-up:
1. Press the "Systemprogr." button on the
control device
for
3 seconds.
3
The yellow LED next to the programming button flashes
(flash frequency: 1 Hz) after the button is pressed and indi-
cates the active programming mode.
The system is now in programming mode for approx.
7 minutes. Each time the start-up button is pressed on a door
or home station, the time is reset to 7 minutes.
Exiting programming mode
1. Briefly press the "Systemprogr." button on the
control
device
to exit the programming mode.
3
The yellow LED goes out.
Start-up documentation
For documentation on the home stations assigned to the call
buttons, please see the table on Page 41.
There you enter the names/homes in the sequence in which
you will allocate the home stations later on.
LED indicators on BUS devices
The active programming mode is also signalled by the LED
of various BUS devices, such as the hands-free feature home
station, the Comfort home station with receiver or the sur-
face-mounted hands-free feature home station.
An overview of the LED indication is found on Page 39.
Summary of Contents for 1288 00
Page 1: ...Operating Instructions System Manual Video Control Device 1288 00...
Page 2: ......
Page 14: ...14 adjustable activation time of door opener...
Page 43: ...43...