Gira 0425 00 Quick Start Manual Download Page 2

(4)  Antenna 

3 Function 

System information 

By statute, the reception characteristics and the antenna cannot be changed. 
The device may be operated in all EU and EFTA countries. 
The declaration of conformity can be viewed on our website. 
The range of a radio system from the transmitter to the receiver depends on various 
circumstances. 
The range of the system can be optimised by selecting the optimal installation location, taking 
into account the structural circumstances. 

picture 2: Reduced range due to structural obstacles 

Example of penetration of various materials: 

Material 

Penetration 

Wood, Plaster, Plasterboard 

approx. 90% 

Brick, Chipboard 

approx. 70% 

Reinforced concrete 

approx. 30% 

Metal, Metal grid 

approx. 10% 

Rain, Snow 

approx. 1-40% 

Intended use 

Radio-controlled operation of a Venetian blind or roller shutter motor 

Operation with suitable radio transmitters 

Installation in appliance box to DIN 49073 

Product characteristics 

End positions of the Venetian blind can be called up via light scenes 

4 Operation 

Operation with radio transmitter 

A radio transmitter has to be taught in order to be able to operate the Venetian blind actuator. 

Observe the instructions for the radio transmitter. 

Depending on how a radio transmitter is operated, the slats are adjusted or the Venetian blind is 
moved. 

32534912 

449056  I00 

29.07.2010 

2/7 

Radio bus system  

Mini radio blind actuator 

Summary of Contents for 0425 00








Reviews: