GIRA
Info
Leak Sensor
Operating Instructions
Leak Sensor
Order No.: 0384 00
Function
The water detector consists of a monitoring device (1) and a sensor (2). If water wets the sensor, the
monitoring device activates an alarm with an LED (3) and an acoustic signal. At the same time, a
zero-voltage contact for additional alarm devices or devices such as a horn, light signaller or shut-off
valve.
Installation steps
1. Deenergise device
2. Pull off cover
3. Fastening is carried out with two 4 x 40 mm cap screws in diagonally opposite holes (4)
4. Screw on cover
5. Secure sensor (2) on bottom of monitoring area
Switching on
•
Sensor must be dry
•
Insert mains plug (8) in socket outlet
•
LED for operation (9) is green
Leak Sensor
08/96
Page: 1 of 3
