Giovenzana GSL30 Translation Of The Original Instructions Download Page 1

Strawinskylaan 1105

1077 XX Amsterdam, The Netherlands

1 / 12

Giovenzana International B.V. reserves the right to change the features and data shown in this document at any time and without notice.

This document cannot therefore be considered a contract with third parties.

EN

translation of the original instructions

GSL30

GSL60

MT-GSL-EN / 21.05.2021

Rev. 3

SILICONE LED STRIPS

CONNECTIONS AND ACCESSORIES  . . . . . . . . . . . . . . . . 2

GSLC001 - Cable-profiled  . . . . . . . . . . . . . . . . . . . . . . . . . 2

GSLC002 - Profiled silicone end cap for power  . . . . . . . 2

GSLC003 - Profiled silicone end cap terminations. . . . . 2

GSLC004 - Profiled screw set . . . . . . . . . . . . . . . . . . . . . . 2

GSLC005 - LED strip tensioners (2 pieces) . . . . . . . . . . . 2

GSLC006 - Wall plugs  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

GSLC007 - LED sealant  . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

GSLC008 - Profiled connection set  . . . . . . . . . . . . . . . . . 3

GSLC009 - Profiled - profiled. . . . . . . . . . . . . . . . . . . . . . . 3

GSLC010 - Profiled bridge connector  . . . . . . . . . . . . . . . 3

GSLC011 - Profiled T connector . . . . . . . . . . . . . . . . . . . . 3

GSLC012 - Profiled cross connector  . . . . . . . . . . . . . . . . 3
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

General considerations  . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Operazioni preliminari  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Strips connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Power connections  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Mounting using Giovenzana tensioner  . . . . . . . . . . . . . . 5

Top fixture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Bottom fixture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
FIXING THE WALL PLUGS. . . . . . . . . . . . . . . . . . . . . . . . . 8
TECHNICAL CARACHTERISTICS  . . . . . . . . . . . . . . . . . . . 9

Flexible strips GL30 and GL60  . . . . . . . . . . . . . . . . . . . . . 9

Cables GSLC001 and GSLC009  . . . . . . . . . . . . . . . . . . . 10

Connectors GSLC0010, GSLC011 and GSLC012  . . . . . 11

Before use, read this booklet carefully to 

acquaint yourself with the features of the 

product. This booklet is an integral part of 

the product and therefore must be kept until 

the product is dismissed.
Improper installation or tampering can cause 

serious damage to people and property, 

therefore installation and maintenance must 

be carried out by specialized and authorized 

personnel.
The device is not intended for use in 

environments with a potentially explosive 

atmosphere or in the presence of corrosive 

substances and in salt fog.

Summary of Contents for GSL30













Reviews: