1
GINGKO AUDIO
ClaraVu™ 7 Mk. 3 Speaker System
Owner’s Manual
Thank you for purchasing Gingko Audio’s
ClaraVu 7 Mk. 3 speaker system.
These striking speakers are a result of 10 years of
intensive research and development. Each speaker is
hand crafted in the USA using the finest parts in the
world. Custom drivers, high-quality caps and coils, OCC
copper cabling and unique cabinet construction result in
superlative resolution and musicality.
Each ClaraVu speaker is hand-built in the USA instead
of coming off a factory line. Each is thoroughly tested
and comes with a 2-year warranty to the original owner.
The ClaraVu 7 speaker consists of a monitor speaker and
a matching powered subwoofer. They are perfect for apartment-size high-end systems, yet their big
sound offers more than satisfying performance in reference-level setups. A combination of 85 dB
sensitivity and 8 ohm minimum impedance means the ClaraVus are easily matched to a wide range of
tube or solid state amplifiers.
The ClaraVu speaker enclosures are available in three beautiful finishes: maple, cherry and gloss piano
black. The modular construction of the system means that you can buy the monitor speakers with
matching stands first, then add the sub modules to make a full range system.
The ClaraVu 7 monitor
is a three-way speaker using a ribbon super-tweeter, a 1” soft dome tweeter and
twin 6.5” paper cone woofers in a unique isobaric configuration. Two woofers are mounted one in front
of the other in a sealed paperboard tube inside a rigid cabinet. The same design is used in the drivers of
the sub module. This design minimizes vibration and standing waves and results in the ClaraVu’s high-
resolution and extreme musicality.
The ClaraVu 7 speakers will show you a “clear view” into your music by capturing all the details and
nuances of the recording and performance.
SPECIFICATONS:
Monitor Speakers – Retail $4995/pair Sub Modules – Retail $2000 each
Super-tweeter: horn-loaded ribbon
Tweeter: 1” silk dome using patented technology
Woofers: 2 custom drivers, 6.5” paper cone
Woofers: 2 custom drivers, 6.5” paper cone
Sub amp: 75w into 8 ohms, 100w/ into 4 ohms
Frequency Response: 45Hz-20KHz +/- 3dB
Options for hookup: low-level via interconnects or
Impedance: 10 ohms nominal, 8 ohms minimum
high-level via speaker wires
Sensitivity: 85 dB
Adjustments: Volume, Crossover frequency, Phase
Recommended power: 30 watts
Dimensions: 22”h x 9”w x 15”d
Sensitivity: 85 dB
Weight: 47 lbs. each
Weight: 48 lbs. each
Cabinet finish - maple, cherry, and piano black
Cabinet finish - maple, cherry, and piano black
Stands – Retail $500/pair
Dimensions: 27”h x 13”w x 14”d
Weight: 38 lbs each
Finish: Gloss Piano Black
