Bolero 6 user manual
________________________________________________________________________________________________________________________________________________________
Repairs
Gin Gliders workshops
All repairs and servicing should be carried out by a Gin Gliders authorised workshop or
directly by Gin Gliders. Gin Gliders workshops have trained staퟍ�, original Gin Gliders parts and
the necessary know-how, all of which will ensure top quality.
Major repairs at the Bolero 6, such as replacing panels, should only be carried out by the
distributor or manufacturer.
Small repairs to the glider
Very small holes in the sail can be repaired with the sticky back tape provided with your
glider. Damaged lines should be replaced by your GIN dealer. Before �tting a replacement
line, check it for length against its counterpart on the other side of the wing. When a line has
been replaced, always in�ate the glider on �at ground to check that everything is in order
before �ying.
WARNING: Do not attempt to perform repairs unless you have the knowledge, experience,
materials and tools needed to do the job properly.
GIN quality and service
We take pride in the quality of our products and are committed to putting right any problems
aퟍ�ecting the safety or function of your equipment and which are attributable to manufacturing
faults. Your GIN dealer is your �rst point of contact if you have any problems with your
equipment. If you are unable to contact your dealer or GIN importer, contact Gin Gliders
directly via our website.
Page 37
