—
１
—
1 Safety
1.1 Instructions for safe operations
Check the main unit and all accessories periodically to make sure that there is no visible
damage that may affect patient’s safety and monitoring performance about cables and
transducers. It is recommended that the device should be inspected once a week at least. When
there is obvious damage, stop using the monitor.
Necessary maintenance must be performed by qualified service engineers ONLY. Users are not
permitted to maintain it by themselves.
The Electrocardiograph cannot be used together with devices not specified in User’s Manual.
When the cardiac defibrillator be used with other electric stimulate devices, Please select the
electrode (type: A30-G26-21) provided by our company.
The electrode and its connector of this ECG must keep from other conductor, for example, the
earth.
According the Standard IEC60601, this device is belonged to internal electrical power source,
CF applied part. it is applied for cardiac examination. This device is safe and reliable.
Please select the ECG cable which is provided by our company, if the defibrillation time is
over 5 s, you should use one-off chest electrode, which can avoid the metal electrode burn
patient’s skin. Please don’t use it with electric stimulator at the same time, if it is compulsory, a
professional technician must guide on the scene.
1.2 Warnings
Explosive hazard—DO NOT use the Electrocardiograph in environment with inflammable gas
such as some ignitable anesthetic agents.
When other device be joined with this ECG device, it must be accorded with Standard
IEC60601, internal electrical power source. because creepage summation may injure the
patient, the creepage current be inspected by the other device.
The disposal of scrap instrument and its accessories (including battery) should follow the local
laws and regulations.
1.3 Attentions
Keep the Electrocardiograph away from dust, vibration, corrosive substances, explosive
materials, high temperature and moisture.
If the Electrocardiograph gets wet, please stop operating it.
When it is carried from cold environment to warm and humid environment, please do not use it
immediately.
Do not operate keys on front panel with sharp materials.
Do not have the product immerged in liquid.
When cleaning the device with water, the temperature should be lower than 60
℃
.
