GILLIG LOW FLOOR, Service Manual, Page: 19 / 506

General Information
9
Chapter – General Information
INTRODUCTION
This manual contains operation and maintenance information for the Gillig Low Floor Bus. The
information pertains to standard installed equipment, common optional equipment, and features. All
information and data in this manual are based on the latest product information available at the time of
publication. The Gillig Corporation reserves the right to make product changes at any time.
Ser vice Bulletins and manual revisions may be published to supplement, supersede, or augment the
information in this manual. The bulletins should be placed in the appropriate places in the manual for
future reference.
IMPORTANT SAFETy INFORMATION
It is your responsibility to be completely familiar with the WARNINGS, CAUTIONS, and NOTICES
described in this Service Manual. These highlighted messages advise against the use of specific service
methods or procedures which can result in personal injury, damage to the equipment, or unsafe operating
conditions. It is important to understand that these messages do not cover every possible situation. Gillig
Corporation could not possibly know and evaluate every single service method, nor could they advise
the service trade of all possible consequences of each method. Accordingly, anyone who uses a service
procedure or tool which is not recommended by Gillig Corporation does so at his or her own risk !
WARNING , CAUTION , and NOTICE messages appear at appropriate places of the manual in special
print. It is critical to the safety of service personnel and to the safe and proper function of the coach that
these messages are carefully observed, especially while undertaking any of the procedures presented in
this manual. WARNINGS, CAUTIONS, and NOTICES appear as follows:
Appears when an operating or service procedure, if not correctly
followed, could result in personal injury or fatality
Appears when an operating or service procedure, if not strictly observed,
could result in damage to the equipment.
Highlights an operating or service procedure which is essential for
proper operation, maintenance, or repair.