Gilera Runner 125 Manual Download Page 17

Page: 17 / 80

01_11

01_12

01_13

Keys (01_11, 01_12, 01_13)

Two types of keys come with the vehicle. The key «

» with a brown grip is the pro-

gramming key. Only one is supplied and it serves to memorise the code of the other
keys or to allow the dealers to take various measures. For this reason it is advised
that it be used only in exceptional circumstances. The key «

» (a copy is supplied),

red in colour, is for normal use, and serves to:
- engine start up

- unlock the fuel tank cap

Together with the keys comes a CODE CARD which is imprinted with the mechanical
code of the keys.

WARNING

THE LOSS OF THE BROWN KEY PREVENTS LATER REPAIRS TO THE "PIAG-
GIO IMMOBILIZER" SYSTEM AND TO THE ENGINE CONTROL UNIT.

WARNING

IT IS ADVISED THAT THE "CODE CARD" AND THE KEY WITH THE BROWN GRIP
BE KEPT IN A SAFE PLACE (NOT ON THE VEHICLE).

1 Vehicle

Summary of Contents for Runner 125

















































































Search results

Summary of Contents for Runner 125

Reviews:

Related manuals for Runner 125

Brands by name

Popular brands

Gilera Runner 125, Manual

Search results

Summary of Contents for Runner 125

Reviews:

Related manuals for Runner 125

Brands by name

Popular brands