manualshive.com logo in svg

Gilera DNA, Manual, Page: 58 / 68

Share
Download
Gilera DNA Manual Download Page 58

Scheduled maintenance table

Adequate maintenance is fundamental to ensuring long-lasting, optimum operation
and performance of your vehicle.

To this end, a series of checks and maintenance operations (at the owner's expense)
have been suggested, which are included in the summary table on the following page.
Any minor faults should be reported without delay to an 

Authorised Service Centre

or Dealer

 without waiting until the next scheduled service to solve it.

All scheduled maintenance services must be carried out at the specified intervals,
even if the stated mileage has not yet been reached. Punctual scooter servicing is
essential to ensure your warranty remains valid. For any further information concern-
ing Warranty procedures and "Scheduled Maintenance", please refer to the "Warranty
Booklet".

EVERY 2 YEARS

Brake fluid - change

Coolant - change

AFTER 1000 KM

Hub oil - change

Oil mixer/throttle linkage - adjustment

Odometer gear - greasing

Steering - adjustment

Brake control levers - greasing

58

6 Programmed maintenance

Summary of Contents for DNA





































































Reviews:

No comments