FCC and CE Compliance:
Sd-25s w/DMX
which are revision 1.6 or later have been tested to comply
with FCC and CE requirements. Revisions earlier than this may have
passed testing, but were not certified at the time of manufacture.
Because
Sd-25s w/DMX
are low voltage DC devices, neither UL or CE
require safety testing.
For fireproofing or additional radio frequency interference shielding,
Sd-25s
w/DMX
can be mounted in a fire rated metallic case. Typically, this would
be a NEMA-rated electrical enclosure or 19” electrical rack.
FCC Instruction to User:
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment has been verified to comply with the limits for a class B
computing device, pursuant to FCC Rules. In order to maintain compliance
with FCC regulations, shielded cables must be used with this equipment.
Operation with non-approved equipment or unshielded cables is likely to
result in interference to radio and TV reception. The user is cautioned that
changes and modifications made to the equipment without the approval of
manufacturer could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numerique de la classe B respecte
toutes les exigences du Reglement sur le
materiel brouilleur du Canada.
EC DECLARATION OF CONFORMITY
Friday, July 21, 2017
Application of Council Directives:
EMC Directive, 89/336/EEC
Manufacturer's Name:
Gilderfluke & Co., Inc.
Manufacturer’s Address:
205 South Flower St., Burbank, California 91502 USA
Importer’s Name:
Importer’s Address:
Type of Equipment:
Professional Audio
Equipment Class:
Commercial and Light Industrial
Model:
Sd-25 w/DMX
Conforms to the following Standards:
EN 55103-1: 1996 and EN 55103-2: 1996
Year of Manufacture:
2006
I the undersigned, hereby declare that the equipment specified above conforms to the above directive(s) and standard(s).
Place:
Burbank, California
Signature:
(signed)
Date: August 1, 2006
Full Name:
Doug Mobley
Position:
CEO
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485
Sd-25 w/DMX Manual • page 39 of 40 • © July 21, 2017 • Gilderfluke & Co. • DCM
