Gilbarco Veeder-Root FlexPay IV Encore 700 S, Manual, Page: 5 / 24

1
SECTION 1 - INTRODUCTION
1
MDE-5287B
Purpose
This manual provides instructions to install a Bank Note Acceptor (BNA) Kit on Encore® 700 S E-CIM™.
Intended Users
This manual is intended for Gilbarco®-trained and certified Authorized Service Contractors (ASCs).
Required Tools
• Phillips® Screwdriver
• 8-mm Socket (Nut Driver or Socket Set)
• Button Cap Head Tamperproof Socket Screw (M07335B103) Hexagonal Key for the tamperproof screw.
Minimum Software Requirement
FlexPay™ IV CRIND® Software Version 42.05.14.
Configured Kits - Parts List
Refer to the packing list for part numbers of the components.