Gilbarco Veeder-Root FlexPay IV Encore 700 S, Manual, Page: 11 / 24

7
SECTION 3 - REMOVING COMPONENTS
3
MDE-5287B
Cables and Electronics
Note: Work on one side at a time to ensure that the components do not get swapped from door to
door.
1
Disconnect all cabling from the main door.
2
Remove all the electronics [money/volume display, totalizers, Price Per Unit (PPUs), etc.] from the
main door.
Note: The electronics will be reused on the new main door. Place them safely to the side.
Figure 2: Disconnecting Cables
Disconnect all cabling
to the main door.
Remove all electronics
from the main door.
Note: The electronics will be reused on
the new main door.