Installation
Page 16
MDE-2597L Gilbarco® Security Module (GSM) PA0258XXXXXXX Installation and Service Instructions · January 2010
Installing PA025801XXXXX GSM in SMART CRIND
™
To install the GSM in the SMART CRIND, proceed as follows:
1
Install the GSM sideways into the slot next to the UPS and main power supply (from Side 2).
Figure 4: Installing the GSM Sideways
Bolts that
secure the GSM
to the frame
2
Secure the GSM onto the frame using the 7/16” bolts provided as a part of the SMART
CRIND Assembly.
Figure 5: Securing the GSM
GSM
Note: The GSM may touch the Power Supply (Battery Back-up) when sliding into place. If so,
move the Power Supply to the left.
