GILBARCO VEEDER-ROOT FlexPay IV, Upgrade Instructions

Page: 11 / 26

7
SECTION 3 - REMOVING COMPONENTS
3
MDE-5491A
Figure 1: Removing Components from E-CIM
Money
Volume Board
Speaker
Speaker/
Intercom
Cable
Display with
PIP3
ADA Option
Keypad
Connection
UPM
Contactless
Ethernet
Cables
from UPM
and Card
Reader
Scanner
Card Reader
2
Remove the grade select buttons by pushing down from the top of the soda button while pulling from
bottom of the soda buttons. The grade select bases will remain in position.
Note: Ensure that you do not dislodge the magnets.
3
Remove the Price Per Unit (PPU) graphic (including adhesive and white adhesive tape) to gain access to
each of the five E-CIM mounting screws on the front of the main door.
Note: Ensure that you have a graphic replacement.