Giken GSK Series, Instruction Manual, Page: 97 / 109

96
③
SD card
In GSK, several functions can be used by inserting the SD card memory into the SD card slot
at the top of the I / F.
The available functions are shown below.
(1) Reading, saving and writing GSK settings
(2) Automatic storage of tightening result
※
Caution
※
The SD card that GSK supports is up to "SDHC".
Please note that it does not correspond to "SDXC" type .
(1) Reading, saving and writing GSK settings
You can read and write settings written to GSK-IF from the setting software to the SD card.
By using the GSK display, you can read the setting data in the GSK-IF and store it in the SD card,
otherwise you can write the setting data in the SD card to the GSK-IF by operating the GSK display.
When reading and writing to the SD card with the setting software, please select setup reading
and setting writing according to the application from the main menu of the setting software.
※
By selecting the red frame in the lower right figure, it is saved in the PC with the extension ".SD"
that can be read and written on the GSK display.
In the lower left figure, read the configuration file with the extension ".SD"
from the storage medium (HDD, USB memory, SD card, etc.) connected
to the PC running the setting software.
The name of the file read by the GSK display or the file saved to the personal computer is "SETTING.SD".