GigaTent GEN-040 Owner'S Manual Download Page 1

Owner’s Manual

MODEL # GEN-040/ Adventure Dome and Tunnel

Dimensions: Dome 4’ x 4’ x 36”

 

         Tunnel: 20” Diameter x 40” Length

ASSEMBLY INSTRUCTIONS

Contents and colors may vary. Please retain package

or future reference.

STYLE #:GEN-040

WASHING & CARE INFORMATION

Hand wash using a mild dishwashing soap and soft 

sponge, then allow the fabric to completely air dry. To 

prevent mold or mildew do not store wet or damp.

WARNING:

Keep all flame and heat away from tent and tent fabric.

This tent meets flammability requirements of CPIA -84 .

THIS TENT IS NOT FIRE PROOF.

IF LEFT IN OPEN FLAME THE TENT WILL BURN.

CAUTION:

This product was not designed to be left out in the sunlight

for extended periods of time. Prolonged UV exposure will

rapidly break down the fabric of this product. UV damage

is not covered under our warranty

WARNING :

NEVER LEAVE CHILDREN UNATTENDED. 

WINDY CONDITIONS MAY UPROOT THE TENT. 

ALWAYS STAKE DOWN TENT.

ADULT SUPERVISION REQUIRED.
AGES 3 AND UP RECOMMENDED.

CAUTION:

Never use any fuel-burning or oxygen-consuming 

devices, or any devices that produce fumes, including 

stoves, lanterns, candles, hibachis or heaters in or 

around your tent. This can result in carbon monoxide 

poisoning, injury or death

Manufactured in China for

Gigatent

55 Haul Rd

Wayne, New Jersey 07470

www.gigatent.com

1-877-836-8701

TO VIEW FULL SELECTION OF OUR

PLAY TENT PRODUCT LINE,

GO TO WWW. GIGATENT.COM 

For questions or concerns call Gigatent at our Toll Free Number: 877-836-8701

Monday-Thursday 9am-5pm EST, Friday 9am-12pm EST or email us at [email protected]

For replacement parts login to gigatent.com/replacements

STEP 1:
Confirm product contents by emptying contents of bag(s)
and confirming all parts are included and undamaged.

STEP 2:
Select a smooth level site and spread out your tent.

STEP 3:
Extend poles and place in position ready for installation.
Take a tent pole and push it through a pole sleeve located
at the top of tent. Repeat process with the remaining tent
pole. Poles will cross each other at the center.

STEP 4:
After sliding poles through sleeves, gently flex poles into an
arch and insert ends into pole pockets at base of tent.
NOTE: Make sure pole sleeve fabric is evenly distributed
along pole and does not catch at pole joints. Undue stress
could break pole or tear fabric.

DESCRIPTION QTY.

DOME TENT
100% Polyester 

1

POLES
Fiberglass Pole; Black 

2

STAKES
Metal 

 4

TUNNELS
100% Polyester 

1

CARRY POUCH
100% Polyester 

1

*CAUTION:
Tunnel pops open. 
Take caution when handling.

STEP 5:
Connect tunnel to tent by securing toggles on
tent to loops on tunnel.

STEP 4

STEP 3

Reviews: