Owner’s Manual
MODEL # CT065/ Action Dome & Tepee with Tunnel
Dome= 4” x 4” x 36” / Tunnel=19” x 4’ / Tepee=38” x 38” x 60”
ASSEMBLY INSTRUCTIONS
Contents and colors may vary. Please retain package
or future reference.
STYLE #:CT065
WASHING & CARE INFORMATION
Hand wash using a mild dishwashing soap and soft
sponge, then allow the fabric to completely air dry. To
prevent mold or mildew do not store wet or damp.
WARNING:
Keep all flame and heat away from tent and tent fabric.
This tent meets flammability requirements of CPIA -84 .
THIS TENT IS NOT FIRE PROOF.
IF LEFT IN OPEN FLAME THE TENT WILL BURN.
CAUTION:
This product was not designed to be left out in the sunlight
for extended periods of time. Prolonged UV exposure will
rapidly break down the fabric of this product. UV damage
is not covered under our warranty
WARNING :
NEVER LEAVE CHILDREN UNATTENDED.
WINDY CONDITIONS MAY UPROOT THE TENT.
ALWAYS STAKE DOWN TENT.
ADULT SUPERVISION REQUIRED.
AGES 3 AND UP RECOMMENDED.
CAUTION:
Never use any fuel-burning or oxygen-consuming
devices, or any devices that produce fumes, including
stoves, lanterns, candles, hibachis or heaters in or
around your tent. This can result in carbon monoxide
poisoning, injury or death
Manufactured in China for
Gigatent
55 Haul Rd
Wayne, New Jersey 07470
www.gigatent.com
1-877-836-8701
TO VIEW FULL SELECTION OF OUR
PLAY TENT PRODUCT LINE,
GO TO WWW. GIGATENT.COM
For questions or concerns call Gigatent at our Toll Free Number: 877-836-8701
Monday-Thursday 9am-5pm EST, Friday 9am-12pm EST or email us at [email protected]
For replacement parts login to gigatent.com/replacements
DESCRIPTION QTY.
DOME TENT
100% Polyester
1
TEPEE
100% Polyester
1
TUNNEL
100% Polyester 1
POLES
Fiberglass Pole; Dome 2
Fiberglass Pole; Tepee
8
STAKES
Metal 4
CARRY POUCH
100% Polyester
1
STEP 1:
Confirm product contents by emptying contents of bag(s)
and confirming all parts are included and undamaged.
STEP 2:
Select a smooth level site and spread out your tent.
STEP 3:
Extend poles and place in position ready for installation.
Take a tent pole and push it through a pole sleeve located
at the top of tent. Repeat process with the remaining tent
pole. Poles will cross each other at the center.
STEP 4:
After sliding poles through sleeves, gently flex poles into an
arch and insert ends into pole pockets at base of tent.
NOTE: Make sure pole sleeve fabric is evenly distributed
along pole and does not catch at pole joints. Undue stress
could break pole or tear fabric.
STEP 5:
Assemble and place 4 sided PVC poles into
floor of tepee.
STEP 6:
Insert standing PVC pole into bottom corner
hub and then insert opposite end of pole into
correseponding pole pocket at top of tent.
Repeat for the other poles.
STEP 7:
Connect tunnel to tent by securing
toggles on tent to loops on tunnel.
STEP 4
STEP 3
STEP 5
STEP 6
STEP 7
