25
Phones
Gigaset T300 PRO / Gigaset T500 PRO / EN Master / A31008-M2212-R102-1y-7619 / admin_administration.fm / 02.12.2010
V
e
rsion 2, 06.0
8
.2010
Configuring phones
Instructions on automatically detecting and configuring phones via the network can be
found in the
chapter (see
Manually configuring phones
Softphones and hardware phones that cannot be configured automatically can be set up
manually.
¤
Using the
Manually
button, open the dialogue for configuring additional phones.
¤
Select the type of phone from the
Telephone Type
dropdown list.
This dropdown list contains all standard phones currently supported by Gigaset T300
PRO / Gigaset T500 PRO. If a device or softphone is not listed, you can either:
– Select "Standard SIP", which contains the basic function settings.
– Create your own configuration for this type of device (see
).
¤
Enter a name and password in the
Telephone name
and
Password
fields for the end
device. These two entries, in conjunction with the server (IP) address, form the
SIP
account
.
¤
Click on
Save
to complete the manual configuration of a new phone.
¤
Assign the phone to a user. This will then show the phone's state as active.
Please note
The field corresponding to
Telephone name
has different designations in the config-
uration interface on the various phone types (clients). Examples include: User name,
authorisation name/authentication name.
For some clients, the
Telephone name
must be entered in two separate fields, e.g., in
user name
und
authorisation name
.
Important
For softphones and manually configured end devices, it is also necessary to enter the
SIP account (user name, password, server IP address) in the settings of the respective
phone and to restart the device.
