Gigaset SL78H User Manual Download Page 10 | Manualshive

Page: 10 / 63

Gigaset SL78H User Manual Download Page 10

8

First steps

Gigaset SL78H / USA/CANADA en / A31008-M2058-R301-4-6019 / starting.fm / 07.02.2011

V

e

rsion 4, 16.0

9

.2005

Setting up the handset for use

The display and keypad are protected by a protective plastic film.

Please remove the protective film.

Inserting the battery and closing the battery cover

Warning

Use only the rechargeable batteries (

page 48) recommended by Gigaset

Communications GmbH; using other batteries could result in significant health
risks and property damage. For example, the outer casing of the batteries could
be destroyed, or the batteries could explode. The phone could also malfunction
or be damaged as a result of using batteries that are not the recommended
type.

¤

First insert the battery at the top of
the receptacle

a

.

¤

Then press the battery downwards

b

until it clicks into place.

¤

Align the protrusions on the
side of the battery cover with
the notches on the inside of the
housing.

¤

Then press the cover until it
clicks into place.

a

b

«
...
8
9
10
11
12
...
»

Summary of Contents for SL78H
































































Reviews:

No comments