Gigaset S820 User Manual Download Page 33

Page: 33 / 85

Gigaset S820-S820A / LUG - UK + IE / A31008-M2404-L101-1-7619 / settings.fm / 11/26/12

mplat

S 13

1x195

1co

l, V

ion 1,

.03.

Changing phone settings

Activating/deactivating repeater

The Gigaset repeater can be used to increase the reception range between your Gigaset handset
and the base. To do so, you must activate repeater operation. During activation, calls currently
taking place via the base are cancelled.

Menu key

Settings

menu page

System

Repeater Mode on/off

After activating or deactivating the repeater, switch your handset off and on again (

page 16).

Changing the system PIN

Menu key

Settings

menu page

System

Security

System PIN

Enter

current PIN (factory setting: 0000)

Enter new system PIN (4 digits; 0 - 9)

Resetting the system PIN

If you have forgotten your system PIN, you can reset it to

0000

. If you do this,

all the base set-

tings

are reset and

all the handsets

are de-registered!

Remove the power cable from the base.



Press and hold the registration/paging key on the base (

page 2) and at the same time

reconnect the power cable to the base.



Press and hold the registration/paging key for at least 5 seconds.

Restoring the phone to the factory settings

You can reset individual changes to the base and handset separately.

The following are

not

affected by the reset:

Date and time

Settings for the configurable page,

Registrations of handsets to the base and the current base selection

System PIN

Entries in the calendar and in the contacts

Redial list

Stored external and internal destination numbers for the baby phone (

Forward alarm to

reset to

External

Destination number for call divert

Resetting the handset (

Handset Reset

) deletes your audio and display settings.

Resetting the base (

Base Reset

) resets the settings for ECO DECT, SMS, answer machine, system

settings and the internal names of handsets, and also deletes call/answer machine lists.

Resetting the handset/base

Menu key

Settings

menu page

System

Resets

Handset Reset/Base Reset

For

Base Reset

: Enter the system PIN

Answer

Yes

to the security prompt

Please note

If you are using a repeater,

ECO DECT

settings (

page 32) are not available.

You can register up to 6 Gigaset repeaters.

Summary of Contents for S820






















































































Search results

Summary of Contents for S820

Reviews:

Related manuals for S820

Brands by name

Popular brands

Gigaset S820, User Manual

Search results

Summary of Contents for S820

Reviews:

Related manuals for S820

Brands by name

Popular brands