31
Making calls
Gigaset S810-S810A / IM EN / A31008-M2306-R101-1-UZ19 / telefony.fm / 03.03.2011
V
e
rsion 4.1, 21
.11.2007
Accepting a call
The handset indicates an incoming call in
three ways: by ringing, by a display on the
screen and by the flashing talk key
c
.
Accept the call by:
¤
Pressing the talk key
c
.
¤
Pressing the handsfree key
d
.
¤
Gigaset S810: press the display key
§Accept§
.
¤
Gigaset S810A: press the display key
Ô
to divert the call to the answering
machine (
If the handset is in the base/charger and the
function is activated
page 71), the handset automatically
answers the call when you remove it from
the base/charger.
To deactivate the ringtone, press the
§Silence§
display key. You can accept the call as long as
it is displayed on the screen.
Accepting a call on a Bluetooth
headset
Prerequisite
: Bluetooth is activated; a con-
nection has been established between the
Bluetooth headset and the handset
(
Only press the talk key on the headset
when the headset rings
; it can take up to
5 seconds.
The menu to set the earpiece and micro-
phone volume can be called up during a call
by pressing the side keys.
For further details about your headset, see
the accompanying user guide.
Calling Line Identification
When you receive a call, the caller's number
is displayed on the screen if the following
conditions are met:
u
Your network provider supports CLIP, CLI.
– CLI (Calling Line Identification): the
caller's number is transmitted.
– CLIP (Calling Line Identification Pres-
entation): the caller's number is dis-
played.
u
You have requested CLIP from your net-
work provider.
u
The caller has requested CLI from the net-
work provider.
Call display with CLIP/CLI
If the caller's number is saved in your direc-
tory, the number is replaced by the corre-
sponding directory entry (
ä
/
k
/
l
symbol
and name/number). If you have assigned a
caller picture to that caller, this will also be
displayed.
Ø«Ú
ä
1234567890
Accept
Silence
1
3
Gigaset S810
2
