Gigaset S675IP, User Manual

Page: 92 / 168

91
Operating the base station on the PABX
Gigaset S675 IP / ALGERIAN eng / A31008-M1915-A751-1-3T19 / settings_bs_hs_pabx.fm / 27.10.08
Ve
rsion 4, 16.09.2005
Show Stat. on HS
Select and press
§OK§
( = on).
Checking the base station
MAC address
Depending on your network configura-
tion, you may have to enter your base sta-
tion MAC address, for example, into your
router's access control list. You can check
your base station MAC address:
v N O Q
The base station MAC address is displayed.
Press and
hold
(idle status).
Operating the base station
on the PABX
The following settings are only necessary
when your PABX requires them; see the
PABX user guide. The settings only con-
cern fixed line network connections.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.
Setting recall
You can set the recall option.
v
¢ ¢
Telephony
¢
Fixed Line
¢
Recall
Select recall and press
§OK§
.
The current setting is indicated by .
Press and
hold
(idle status).
Setting pauses
Changing pause after line seizure
You can set the length of the pause
inserted between pressing the talk key
and sending the phone number.
v N O L
Enter a number for the length
of the pause (
1
= 1 sec.;
2
= 3 sec.;
3
= 7 sec.) and
press
§OK§
.
Changing the pause after the recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v N O
Enter a number for the length
of the pause (
1
= 1 sec.;
2
= 2 sec.;
3
= 3 sec.;
4
= 6 sec.) and press
§OK§
.
Switching temporarily to
tone dialling (DTMF)
If your PABX still operates with dial pulsing
(DP), but you need touch tone dialling for
a connection (e.g. to listen to the network
mailbox for your fixed line network con-
nection) you must switch to touch tone
dialling for the call.
Precondition
: You are currently conduct-
ing an external call via the fixed line net-
work or you have dialled an external fixed
line network number or an external call is
signalled.
§Options§
Open menu.
Tone Dialing
Select and press
§OK§
.
Touch tone dialling is now activated
for
this call only
.
Please note:
For how to make the setting on the Web con-
figurator, see page 119.
‰
‰